ASTM A517 high strength steel plate
Classification :
Keywords:
ASTM A517 high strength steel plate
Product introduction
ASTM A517
The ASTM A517 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered material used in the application of fusion welded boilers and pressure vessels. Under this specification, the plate thickness determines the grade selection and the mechanical properties. Plates 2.5" in thickness and under, will have minimum Yield Strength of 100 ksi. Plates over 2.5" in thickness will have a minimum Yield strength of 90 ksi. Typical applications include unfired vessels and tanks.
Supplementary Technology: HIC Test | NACE MR0175 | Z15 | Z25 | Z35 | S1 | S2 | S3 | S5 | S6 | S7 | S8 | S9 | S11 | S12 | S17.
Thickness: 6MM to 300MM,
Width: 1500mm to 4050mm,
Length: 3000mm to 15000mm
steel is specialized in supplying ASTM A517 steel plate. For more information of A517 steel plates, please check them in following:
Technical data
ASTM A517 Grade A,A517 Gr.A,A517GrA steel plate
ASTM A517 standard specification for pressure vessel plates, alloy steel, high-strength, quenched and tempered.
The steel shall be killed and shall conform to the fine austenitic grain size requirement of Specification A20/A20M.
| A517 grade A Chemical Composition | |||||
| Grade | The Element Max (%) | ||||
| C | Si | Mn | P | S | |
| A517 grade A | 0.13-0.23 | 0.34-0.86 | 0.74-1.20 | 0.035 | 0.035 |
| Cr | Mo | B | Zr | ||
| 0.46-0.84 | 0.15-0.31 | 0.0025 | 0.04-0.16 | ||
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
| Grade | A517 grade A Mechanical Property | |||
| Thickness | Yield | Tensile | Elongation | |
| A517 grade A | mm | Min Mpa | Mpa | Min % |
| 6-65 | 690 | 795-930 | 16% | |
| 65-150 | 620 | 725-930 | 14% | |
ASTM A517 Grade B,A517 Gr.B,A517GrB steel plate
| A517 grade BChemical Composition | |||||
| Grade | The Element Max (%) | ||||
| C | Si | Mn | P | S | |
| A517 grade B | 0.13-0.23 | 0.13-0.37 | 0.64-1.10 | 0.035 | 0.035 |
| Cr | Mo | B | Ti | V | |
| 0.36-0.69 | 0.12-0.28 | 0.0005-0.005 | 0.01-0.05 | 0.02-0.09 | |
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
| Grade | A517 grade B Mechanical Property | |||
| Thickness | Yield | Tensile | Elongation | |
| A517 grade B | mm | Min Mpa | Mpa | Min % |
| 6-65 | 690 | 795-930 | 16% | |
| 65-150 | 620 | 725-930 | 14% | |
ASTM A517 Grade E,A517 Gr.E,A517GrE steel plate
| A517 grade EChemical Composition | |||||
| Grade | The Element Max (%) | ||||
| C | Si | Mn | P | S | |
| A517 grade E | 0.10-0.22 | 0.08-0.45 | 0.35-0.78 | 0.035 | 0.035 |
| Cr | Mo | B | Ti | V | |
| 1.34-2.06 | 0.36-0.64 | 0.001-0.005 | 0.005-0.11 | ||
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
| Grade | A517 grade E Mechanical Property | |||
| Thickness | Yield | Tensile | Elongation | |
| A517 grade E | mm | Min Mpa | Mpa | Min % |
| 6-65 | 690 | 795-930 | 16% | |
| 65-150 | 620 | 725-930 | 14% | |
ASTM A517 Grade F,A517 Gr.F,A517GrF steel plate
| A517 grade FChemical Composition | ||||||
| Grade | The Element Max (%) | |||||
| C | Si | Mn | P | S | Cu | |
| A517 grade F | 0.08-0.22 | 0.13-0.37 | 0.55-1.10 | 0.035 | 0.035 | 0.12-0.53 |
| Cr | Mo | B | V | Ni | ||
| 0.36-0.69 | 0.36-0.64 | 0.0005-0.006 | 0.02-0.09 | 0.67-1.03 | ||
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
| Grade | A517 grade F Mechanical Property | |||
| Thickness | Yield | Tensile | Elongation | |
| A517 grade F | mm | Min Mpa | Mpa | Min % |
| 6-65 | 690 | 795-930 | 16% | |
| 65-150 | 620 | 725-930 | 14% | |
ASTM A517 Grade H,A517 Gr.H,A517GrH steel plate
| A517 grade H Chemical Composition | ||||||
| Grade | The Element Max (%) | |||||
| C | Si | Mn | P | S | Ni | |
| A517 grade H | 0.10-0.23 | 0.13-0.37 | 0.87-1.41 | 0.035 | 0.035 | 0.27-0.73 |
| Cr | Mo | B | V | |||
| 0.36-0.69 | 0.17-0.33 | MIN 0.0005 | 0.02-0.09 | |||
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
| Grade | A517 grade H Mechanical Property | |||
| Thickness | Yield | Tensile | Elongation | |
| A517 grade H | mm | Min Mpa | Mpa | Min % |
| 6-65 | 690 | 795-930 | 16% | |
| 65-150 | 620 | 725-930 | 14% | |
ASTM A517 Grade P,A517 Gr.P,A517GrP steel plate
| A517 grade P Chemical Composition | ||||||
| Grade | The Element Max (%) | |||||
| C | Si | Mn | P | S | Ni | |
| A517 grade P | 0.10-0.23 | 0.18-0.37 | 0.40-0.78 | 0.035 | 0.035 | 1.15-1.55 |
| Cr | Mo | B | ||||
| 0.79-1.26 | 0.41-0.64 | 0.001-0.005 | ||||
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
| Grade | A517 grade P Mechanical Property | |||
| Thickness | Yield | Tensile | Elongation | |
| A517 grade P | mm | Min Mpa | Mpa | Min % |
| 6-65 | 690 | 795-930 | 16% | |
| 65-150 | 620 | 725-930 | 14% | |
ASTM A517 Grade Q,A517 Gr.Q,A517GrQ steel plate
| A517 grade Q Chemical Composition | ||||||
| Grade | The Element Max (%) | |||||
| C | Si | Mn | P | S | Ni | |
| A517 grade Q | 0.12-0.23 | 0.13-0.37 | 0.87-1.41 | 0.035 | 0.035 | 1.15-1.55 |
| Cr | Mo | V | ||||
| 0.94-1.56 | 0.36-0.64 | 0.02-0.09 | ||||
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
| Grade | A517 grade Q Mechanical Property | |||
| Thickness | Yield | Tensile | Elongation | |
| A517 grade Q | mm | Min Mpa | Mpa | Min % |
| 6-65 | 690 | 795-930 | 16% | |
| 65-150 | 620 | 725-930 | 14% | |
ASTM A517 Grade S,A517 Gr.S,A517GrS steel plate
| A517 grade S Chemical Composition | ||||||
| Grade | The Element Max (%) | |||||
| C | Si | Mn | P | S | Ti | |
| A517 grade S | 0.10-0.22 | 0.13-0.45 | 1.02-1.62 | 0.035 | 0.035 | 0.07 |
| Cb | Mo | |||||
| 0.07 | 0.10-0.38 | |||||
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
| Grade | A517 grade S Mechanical Property | |||
| Thickness | Yield | Tensile | Elongation | |
| A517 grade S | mm | Min Mpa | Mpa | Min % |
| 6-65 | 690 | 795-930 | 16% | |
| 65-150 | 620 | 725-930 | 14% | |
Equipment
Why Choose Us?
1)The products can be made completely according to the customer's requirements, and we have our own factory.
2)High quality product and good price.
3)Good Pre-sale、on sale and after sales service.
4)Short delivery time.
5)Exported all over the world, with rich experience.
Package
FAQ:
Q：Will you offer samples?
A：Yes. We will provide samples according to your needs and send them out within three days after receiving payment.
Q：Do you have the products in stock?
A：We have the products in stock. Also, we can produce for your order.
Q：Do you offer after-sales services?
A：Certainly. If you have any questions, please feel free to contact us. We shall certainly do it to your satisfaction.
Factory
The factory covers an area of nearly 60000 square meters and has processing equipment such as large shear machines, circular shear machines, straightening machines, annealing furnaces, punching and shearing lines. The company has not only established long-term strategic cooperation relationships with more than 600 domestic large and medium-sized enterprises such as FAW, China National Heavy Duty Truck Group, Sinopec, and Inspur Group. Our products are also exported to over 60 countries and regions in Europe, the Americas, the Middle East, Southeast Asia, and Australia. The products are widely used in industries such as mechanical manufacturing, electrical appliances, electronics, automobiles, insulation, molds, aerospace, military, construction, printing, food, etc
The company implements full process quality control, has a strict quality control system, and closely monitors every step of storage, inspection, and packaging. No negligence is allowed, and unqualified products are not allowed to enter the warehouse. The company has established detailed supplier records and regularly evaluates supply quality. We solemnly promise that if the service is not good, there will be rewards for reporting; If the quality exceeds the standard, the loss will be my package; If the quantity is incorrect, if one is missing, make up ten; If the product is not satisfactory, it will be returned unconditionally.
RELATED PRODUCTS
GET A FREE QUOTE
PRODUCT
CONTACT US
GET A FREE QUOTE
Copyright : Jiangsu Guoren Steel Co., Ltd. Powerby : 300.cn jinan2 Seo Tags 【Business license】